e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 148
4.7.8
Transfer belt cam motor (M14)
4.7.9
Transfer belt contact/release detection sensor (S46)
(1) Take off the transfer belt unit.
P. 4-144"4.7.6 Transfer belt unit (TBU)"
(2) Disconnect 1 connector and remove 2
screws. Then take off the bracket [1].
Fig. 4-432
(3) Remove 2 screws and then take off the
transfer belt cam motor.
Notes:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the motor
could be damaged.
Fig. 4-433
(1) Take off the transfer belt.
(2) Disconnect 1 connector [1] and release 3
latches. Then take off the transfer belt
contact/release detection sensor [2].
Fig. 4-434
[ 1 ]
Screw
Transfer belt cam motor
[ 1 ]
[ 2 ]