Toshiba E-Studio 5540c, Service Manual

Page: 1432 / 1499

e-STUDIO5540C/6540C/6550C
05/08 Mode Element Sub Element Item Subitem Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM Contents
Proc
edure
ServiceUI
05 Line art The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes. Adjustment
mode Image
Processing Pure
Black/Gray
threshold
adjustment PRT(color) PCL/Image 8212 3 8 1~255 4 Yes SYS
05 Text The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes. Adjustment
mode Image
Processing Pure
Black/Gray
threshold
adjustment PRT(color) Twin color
print/General 8213 8 1~255 1 Yes SYS
05 Graphics The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes. Adjustment
mode Image
Processing Pure
Black/Gray
threshold
adjustment PRT(color) Twin color
print/General 8214 1 1~255 1 Yes SYS
05 Image The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes. Adjustment
mode Image
Processing Pure
Black/Gray
threshold
adjustment PRT(color) Twin color
print/General 8215 1 1~255 1 Yes SYS
05 Image Sets whether the image on an original is printed in
the color or the black mode.
0: OFF (printed in color)
1: ON (printed in black) Adjustment
mode Image
Processing Black selection PRT(color) Twin color print 8218 0 0~1 1 Yes SYS
05 Default setting This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data. If this setting is disabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data) Adjustment
mode Image
Processing Stroke
adjustment PS/PDF
automatic stroke
adjustment 600dpi 8239 0 0 0~3 4 SYS
05 Minimum stroke width when
disabled This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes 1
dot if the value of this code is set to "1"; equally, if it
is set to “2”, the width of the lines becomes 2 dots.
1: 1 dot
2: 2 dots Adjustment
mode Image
Processing Stroke
adjustment PS/PDF
automatic stroke
adjustment 600dpi 8239 1 2 1~2 4 SYS
130 Ver11 05 Adjustment Mode