Toro Groundsmaster 328-D, Service Manual

Page: 201 / 402

4. Remove the inner axle shaft seal (Fig. 8). Discard the
seal and replace with a new one at the time of assembly.
Figure 8
5. Center punch the outside of the retaining ring (Fig. 9).
Figure 9
6. Drill a 1/4 inch hole (approximate) into the outside of
the retainer ring to a depth of about 3/4 the thickness of
the ring (Fig. 10).
IMPORTANT: Drilling completely through the re­
tainer ring could damage the shaft.
Figure 10
Groundsmaster
®
300 Series Page 7 - 5 Repairs