Topcon mmGPS 3D Paver, Reference Manual

Page: 41 / 288

Setting Up the Base Station
P/N 7010-0781
2-7
Figure 2-3. Base Station Setup
Step 3: connect component cables to the receiver
(Legacy-E+ or
HiPer Lite+), then connect the cables to other components
(Figure 2-4 on page 2-8).
• If using Bluetooth wireless technology to connect a controller and
the HiPer Lite+ receiver, refer to the controller’s or receiver’s
documentation.
• Connect the following cables for the following components to the
Legacy-E+ receiver, then to the component:
– GPS antenna: connect the antenna cable to the receiver’s
ANT port, then to the GPS antenna.
– Power: connect the power cable to the receiver’s PWR1 or
PWR2 port. Attach the alligator clamps to the battery: RED
to positive, BLACK to negative.
PG-A1 Base Station with
Legacy-E+ GPS receiver
HiPer Lite+ Base Station