Topcon mmGPS 3D Paver, Reference Manual

Page: 125 / 288

Control Menu
P/N 7010-0781
3-55
3. Enter the following information and press
Ok
(Figure 3-54).
• Select the serial number of the transmitter on this channel.
• Select the control point over which the transmitter is
installed.
• Enter the height of the transmitter.
• Select the method used to measure the height of the
transmitter.
Figure 3-54. Set up PZL-1 Laser Transmitter in 3DMC
Copying PZL-1 Transmitter Information
The control point contains PZL-1 transmitter information.
Occasionally, this information may need to be updated, depending on
day-to-day operations and possible setups. As the job progresses, the
transmitter’s position may have to be moved or multiple transmitters
set up.
To change the transmitter’s channel information,
see “Setting up
the PZL-1Transmitter in 3DMC” on page 5-14.
To copy transmitter information from an existing control point
file,
first make sure the control point file has been copied to the
control box from Pocket-3D.
1. Press
Topcon Logo Control PZL-1 transmitters
.
2. Tap the
Transmitters
tab and press
Copy
(Figure 3-55 on
page 3-56).