Topcon mmGPS 3D Paver, Reference Manual, Page: 197 / 288

GPS Localization
P/N 7010-0781
5-21
2. Press
Topcon Logo File Control
. The
Control point files
dialog box displays (Figure 5-13).
3. Select the correct control points file, and press
Edit
. The
Control
points
dialog box displays, listing all control points for the file
and jobsite (Figure 5-13).
4. Select a control point and press
Edit
, the
Control points
dialog
box displays. This control point file should already have local site
coordinates from the selected control point file (Figure 5-14 on
page 5-22).
Figure 5-13. Control Point Files Dialog Box
5. Tap in each WGS84 coordinate entry box to display the numeric
pop-up keyboard and enter the coordinates for latitude (Lat),
longitude (Lon) and height (Hgt) (Figure 5-14 on page 5-22).
6. Tap the two GPS localization check boxes to enable (check) them
for performing the GPS localization mathematical conversion
(Figure 5-14 on page 5-22).
2
3
4a
4b