Topcon mmGPS 3D Paver, Reference Manual

Page: 50 / 288

Setting up the Jobsite and Pocket-3D
mmGPS 3D Paver Reference Manual
2-16
5. Press
Yes
to apply the file to the jobsite.
Figure 2-10. Create a Control Point File
Then, enter control point data into the file
(Figure 2-11 on
page 2-17):
1. Tap
Data Control Control points
.
2. Tap
Add
to enter the local coordinates for the control point.
3. Enter a name and description for the control point and its local
coordinates. Press
Ok
.
4. Repeat steps 2 and 3 for each control point.
5. Press
Ok
to save the data.
2
1
4
3