Topcon mmGPS 3D Paver, Reference Manual, Page: 63 / 288

mmGPS Operations with Pocket-3D
P/N 7010-0781
2-29
3. Walk several feet away from the transmitter and face the sensor
towards the transmitter (Figure 2-28).
Figure 2-28. Setup Transmitter and Sensor
4. In Pocket-3D, tap
Setup mmGPS transmitters
.
5. On the
Channel
tab, press
Edit Channel
.
6. Tap the
Resection
button on the
channel setup
dialog box
(Figure 2-29 on page 2-30).
7. Optionally, enter the following measurement parameters on the
resection
dialog box (Figure 2-29 on page 2-30).
• Duration (secs) – enter the duration, in seconds, in which to
measure the point.
• H. Precision / V. Precision – enter a horizontal / vertical
precision, in the project’s units, with which to measure the
point.
The point name is automatically added to the list of control points
as “TX-[n] (Resected)”, where “n” is the channel number.
10 ft