Topcon mmGPS 3D Paver, Reference Manual

Page: 40 / 288

Setting up the Jobsite and Pocket-3D
mmGPS 3D Paver Reference Manual
2-6
Slide the instrument by loosening the tripod screw, place the
point on the center mark, and then tighten the tripod screw. Slide
the instrument carefully to prevent any dislocation of the bubble.
7. Level the Instrument.
Level the instrument as in step 4. Rotate the instrument, checking
that the bubble is in the center of the plate level, regardless of
telescope direction. Then tighten the tripod screw to lock in
position.
Step 2: attach additional components to the tripod
(Figure 2-3 on
page 2-7).
Attach and/or prepare additional Base Station components. These
components vary, depending on the type of Base Station.
• For the PG-A1 Base Station, attach the radio modem, radio
antenna, MC-2.5 Receiver Box, and power source (optional).
• For the HiPer Lite+ Base Station, attach a power source
(optional).
Point
Centermark