Topcon mmGPS 3D Paver, Reference Manual

Page: 215 / 288

Using Sonic Control at the Jobsite
P/N 7010-0781
6-7
To create a 2D machine configuration file, see “Creating a 2D
Machine Configuration File” on page 6-7.
Figure 6-7. Select Machine Configuration File
3DMC Operations for Sonic Tracker
Applications
When using the mmGPS 3D Paver system for 2D control
applications, only the Control menu, the View menu, the Elevation
Control key, and the Slope Control key are relevant to 2D control
applications. Other files, settings, and selections have no affect in this
mode.
Creating a 2D Machine Configuration File
1. Press
Topcon Logo Control Machine setup
.
2. Press
New
to create a new machine configuration file or select an
existing machine configuration file and press
Edit
.
3. Enter or select the following configuration and equipment
parameters (Figure 6-8 on page 6-8). Then press
Next
.
• Configuration name – enter a name for the machine. For easy
identification later, include the application type.
• Machine type – select the type of machine
5a
5b