Topcon mmGPS 3D Paver, Reference Manual

Page: 52 / 288

Setting up the Jobsite and Pocket-3D
mmGPS 3D Paver Reference Manual
2-18
6. Immediately disconnect the Pocket-3D controller from the
receiver. Performing any other activities while connected
converts the Base to a Rover.
Figure 2-12. Enter Base Station Information and Start Base
For a mmGPS transmitter, enter transmitter information:
1. Connect the controller and transmitter. Check the channel of the
transmitter. Tap
Setup mmGPS transmitters
.
2. Tap the
Transmitters
tab and press
Download
to retrieve
calibration data from the connected transmitter. Refer to the
Pocket-3D User’s Manual
to calibrate or adjust the transmitter
(Figure 2-13 on page 2-19).
3. Tap the
Channel
tab and press
Edit Channel
to select the
channel, the transmitter description, the transmitter ID, and the
control point over which the transmitter is installed. Enter the
height of the tripod.
1 2 3
4 5