Topcon mmGPS 3D Paver, Reference Manual

Page: 46 / 288

Setting up the Jobsite and Pocket-3D
mmGPS 3D Paver Reference Manual
2-12
Setting up PZL-1
For machine control applications, the PZL-1 transmitter attaches to
either a standard tripod or a fixed 2m tripod over a surveyed point. To
locate the transmitter over an unknown point, see “Performing a
Resection” on page 2-28.
The following setup requires Pocket-3D to activate and initialize the
transmitter. For more information on the Pocket-3D software, refer to
the
Pocket-3D User’s Manual
and
Pocket-3D Reference Manual
.
1. Locate a control point over which to set up the PZL-1 laser
transmitter.
2. Attach the transmitter to the tripod.
3. Turn on the transmitter’s power and select a channel for the
transmitter (Figure 2-7 on page 2-13).
To assign a channel to the transmitter, press the channel button
until the corresponding LED lights up.
4. Connect the transmitter and Pocket-3D controller (Figure 2-7 on
page 2-13).
NOTICE
See page 2-4 for detailed notes on how to setup and
level a tripod.