Topcon mmGPS 3D Paver, Reference Manual

Page: 247 / 288

9168 Control Box
P/N 7010-0781
7-13
Problem
Elevation Control key displays:
“Waiting for Initialization”
Causes
Solutions
The MC-2.5 Receiver
Box has not been
successful tracking
enough valid satellites. Check that the rover GPS antenna has a
clear view of the sky.
Check for obstructions, such as trees,
buildings, and vehicles, that can block or
reflect satellite signals.
The system is still in
the process of
determining a solid
position. If this is the very first time for operation,
this message may persist for several
minutes while the Legacy-E+ or Hiper Lite
obtains a new almanac.
Problem
Elevation Control key displays:
“Out of design area”
Causes
Solutions
The machine is out of
the Design Surface
area. Make sure that the correct Control Point
File and Design Surface file is selected.
Move into the Design Surface area so the
operator can start grading.
Problem
Elevation Control key displays :
“No GPS localization”
Causes
Solutions
The Control Points file
currently selected has
not been localized
properly. Make sure that the correct Control Point
file currently is selected.