Topcon mmGPS 3D Paver, Reference Manual

Page: 236 / 288

Troubleshooting
mmGPS 3D Paver Reference Manual
7-2
Base Station
This section lists possible Base Station problems you may encounter
(also refer to the Base Station’s documentation). If you still have
problems after trying the solutions listed here, contact TPS customer
support.
Problem
Legacy-E+ or Hiper Lite receiver does not power on.
Causes
Solutions
The PWR button was
pressed too quickly. Make sure you hold the PWR button down
for at least one second. A quick press will
not activate the receiver.
The power cable is
incorrectly connected
or damaged. Check that the power cable is correctly
connected to the battery—RED to positive
and BLACK to negative—and that the
battery is charged.
Check that the RED dots on the power
cable connector and the socket on the
receiver are aligned, and the cable is
pushed in as far as it can go.
If the power cable is damaged, contact your
dealer to replace it.
Problem
Radio modem does not power on.
Causes
Solutions
The power cable is
incorrectly connected
or damaged. Check that the power cable is correctly
connected to the battery—RED to positive
and BLACK to negative—and that the
battery is charged.
If the power cable is damaged, contact your
dealer to purchase a new cable.