TomTom 4PL50 User Manual Download Page 168 | Manualshive

Page: 168 / 177

background image

168

Operating temperature
This device will remain fully operational within the temperature range 14°F / -10°C to 131°F / 55°C.
Prolonged exposure to higher or lower temperatures can cause damage to your device, and is
therefore advised against.
Long period storage: -4°F / -20°C to 95°F / 35°C.

Important: Before you switch on the device, let the device acclimatize to the standard operating
temperature range for at least 1 hour. Do not use the device outside of this temperature range.

Device battery (Non-replaceable)
This product contains a lithium ion battery.
Do not modify or re-manufacture the battery. Do not attempt to insert foreign objects into the
battery, or immerse or expose to water or other liquids. Do not expose the battery to fire,
explosion, or other hazard.
Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
Do not attempt to replace the battery yourself unless the user manual clearly indicates that the
battery is user replaceable.
User replaceable batteries must only be used in systems for which they are specified.

Caution: Risk of explosion if the battery is replaced by an incorrect type.
Do not remove or attempt to remove the non-user-replaceable battery, and contact a qualified
professional in case you wish to remove it.
The stated battery life is the maximum possible battery life which is based on an average usage
profile and can only be achieved under specific atmospheric conditions. To prolong the battery
life, keep the device in a cool, dry place. Charging will not occur at low (32°F / 0°C) or high (113°F /
45°C) temperatures.
Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or
ignite and cause injury and/or damage. Do not attempt to pierce, open, or disassemble the
battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with
water and seek medical attention immediately.

Battery waste disposal
THE BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY
ACCORDING TO THE LOCAL LAWS AND REGULATIONS AND ALWAYS KEPT SEPARATE FROM
HOUSEHOLD WASTE. BY DOING THIS YOU WILL HELP THE ENVIRONMENT.

«
...
166
167
168
169
170
...
»

Summary of Contents for 4PL50


















































































































































































Reviews:

No comments

Related manuals for 4PL50

Brand: Asuka Pages: 21

Brand: Tyco Fire Product Pages: 8

Brand: Discount Car Stereo Pages: 6

Brand: Caliber Pages: 20

Nitrogen Pac SC-W

Brand: UNITED Pages: 112

Brand: Eclipse Pages: 15

Brand: Mercedes-Benz Pages: 34

Brand: Sony Pages: 48

Brand: Netafim Pages: 2

Brand: Netafim Pages: 14

Brand: Viking Pages: 16

Brand: InCarTec Pages: 16

Brand: Graco Pages: 4

Brand: Task Force Tips Pages: 12

Brand: XO Vision Pages: 17

Brand: Ituran Pages: 51

Brand: Hardstone Pages: 4

Brand: Tview Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands