manualshive.com logo in svg

TomTom 4PL50, User Manual

Share
Download
TomTom 4PL50 User Manual Download Page 125

125 

 
 

 

Considerations 

This section contains important considerations for the use of your TomTom PRO together with the 
TomTom LINK and/or WEBFLEET. 

Maintain connection to LINK 

The following applies when you are using a PRO 7xxx connected to a TomTom LINK. 

If you are using your PRO together with a LINK, these devices must be connected to fully benefit 
from the additional WEBFLEET functionality. 
Messages you send to the office are only sent when your PRO and the LINK are connected. When 
there is no connection between the two devices, the messages are stored on your PRO and sent 
to WEBFLEET as soon as your PRO is connected again. 

Maintain connection to WEBFLEET 

The following applies when you are using a PRO 5xxx connected to WEBFLEET. 

If you are using your PRO device connected to WEBFLEET, the PRO device must maintain a 
connection to the WEBFLEET service to fully benefit from the additional WEBFLEET functionality. 
Messages are only sent to your office if your PRO is connected to WEBFLEET. When there is no 
connection, the messages are stored on your PRO device. 

Configuration from the office 

Status message configuration and the selection between Change logbook mode and Report work 
time can only be made by the office. 

Considerations 

Summary of Contents for 4PL50


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands