TomTom 4PL50 User Manual Download Page 167 | Manualshive

Page: 167 / 177

background image

167

Proper mounting
Do not mount the device in a way that may obstruct your view of the road or your ability to control
the vehicle. Do not place the device in an area that may obstruct the deployment of an airbag or of
any other safety feature of your vehicle.

Pacemakers
Pacemaker manufacturers recommend that a minimum of 15 cm / 6 inches be maintained
between a handheld wireless device and a pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent with independent research and recommenda-
tions by Wireless Technology Research.
Guidelines for people with pacemakers:



You should ALWAYS keep the device more than 15 cm / 6 inches from your pacemaker.



You should not carry the device in a breast pocket.

Other medical devices
Please consult your physician or the manufacturer of the medical device, to determine if the
operation of your wireless product may interfere with the medical device.

Warning for Australia
The user needs to turn off the device when exposed to areas with potentially explosive atmos-
pheres such as gas stations, chemical storage depots, and blasting operations.

Device care
It is important to take care of your device:



Do not open the casing of your device under any circumstances. Doing so may be dangerous
and will void the warranty.



Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners.

Environmental and Battery information

Your device
Do not disassemble, crush, bend, deform, puncture, or shred your device. Do not use it in a
humid, wet and/or corrosive environment. Do not put, store, or leave the device in a high
temperature location, in direct sunlight, in or near a heat source, in a microwave oven, or in a
pressurized container, and do not expose it to temperatures over 55°C (122°F) or below -20°C
(-4°F).
Avoid dropping the device. If the device is dropped and you suspect damage, please contact
customer support. Use the device only with the chargers, mounts, or USB cables provided. For
TomTom approved replacements, go to telematics.tomtom.com.

«
...
165
166
167
168
169
...
»

Summary of Contents for 4PL50


















































































































































































Reviews:

No comments

Related manuals for 4PL50

Brand: GoPass Pages: 38

ProAudio ARX7570z

Brand: Clarion Pages: 29

Brand: Reliable Pages: 4

Brand: Lanzar Pages: 13

Brand: Boss Audio Systems Pages: 36

Brand: Pioneer Pages: 48

Brand: Pioneer Pages: 166

Brand: Jensen Pages: 17

Brand: Pioneer Pages: 6

Brand: Pioneer Pages: 2

Brand: Pioneer Pages: 35

Brand: Pioneer Pages: 15

Brand: Pioneer Pages: 34

Brand: Pioneer Pages: 44

Brand: Pioneer Pages: 40

Brand: Pioneer Pages: 60

Brand: Pioneer Pages: 72

Brand: Pioneer Pages: 77

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands