Tokyo Keiki KRG-10, User Manual

Page: 63 / 200

5-8
[4--]
Measurement
Support
[4-0] Averaging Time 60 - 1 ~ 120
[4-1] Median Filter 0 - 0 ~ 120
[4-2] Re-search Delay 30 - 1 ~ 120
[4-3] Alarm Delay 30 - 1 ~ 120
[4-4] Surface Detect Mode 0 - 0, 1
[4-5] Negative Level as Zero 0 - 0, 1
[4-6] Noise Margin 15 dB 0 ~ 255
[5--]
Outlier Removal
[5-0] Valid Window 0.8 m or Ft 0.000 ~ 99.999
[5-1]
Double Bounce
- Double Bounce Removal
0 - 0, 1
[5-2]
Double Bounce
- Double Bounce Offset
0 m or Ft -99.999 ~ 99.999
[5-3] Tank Bottom - Bottom Visible 0 - 0, 1
[5-4] Tank Bottom - Window 0.3 m or Ft 0.000 ~ 99.999
[6--]
Tracking
[6-0] Level Tracking 0 - 0, 1
[6-1] Level Prediction 0 - 0, 1
[6-2] Slow Search - Slow Search 0 - 0, 1
[6-3] Slow Search - Speed 0 m or Ft 0.000 ~ 99.999
[6-4]
Empty Tank Detection
- Empty Tank Detection
0 - 0, 1
[6-5]
Empty Tank Detection
- Position
0 m or Ft 0.000 ~ 99.999
[7--]
Calibration
[7-0] Fixed Current Output 0 mA 0, 3.600 ~ 22.000
[7-1] Calibration - 4mA Calibration 4 mA 3.500 ~ 4.500
[7-2] Calibration - 20mA Calibration 20 mA 15.000 ~ 25.000
[7-3] Offset Calibration 0 m or Ft -1.000 ~ 1.000
[7-4] Span Calibration 1 - 0.500 ~ 1.500
[7-5] Flow Offset Calibration 0 - 0 ~ 99999
[7-6] Flow Span Calibration 1 - 0.010 ~ 2.000
[7-7] Flow Cutoff 0 - 0 ~ 99999
[8--]
Tools
[8-0] Search 0 - 0, 1
[8-1] Parameter Backup / Recovery 0 - 0, 1, 2
[8-2] Reboot 0 - 0, 1
[8-3] Device Status - - -
[8-4] Firmware Version - - -
[8-5] HART Multidrop Mode 1 - 0, 1