Tokyo Keiki KRG-10, User Manual

Page: 148 / 200

6-73
(5) Switching the measurement mode
There are two measurement modes, which are as follows: The measurement mode can be
switched by clicking the "Mode" button in the measurement operation area.
- Data update mode (the measurement graph is being updated and measurement graph
operations cannot be performed)
- Historical data mode (the measurement graph has been stopped and measurement graph
operations can be performed)
(5-1) Data update mode
Data update mode is the mode in which the graph is regularly updated. Current
measurement values can be monitored in real time using the graph, but graph operations
cannot be performed.
(5-2) Historical data mode
Historical data mode is the mode in which graph updating has been stopped. Although
current measurement values cannot be monitored in real time using the graph, the displayed
graph can be analyzed using operations such as Drag / Zoom Up / Zoom Reset. Also, during
historical data mode, the display range of the graph can be changed according to the range
settings.
●
Graph Drag / Zoom Up / Zoom Reset
It is possible to change the display range of the graph by right clicking on the graph and
then dragging. Also, Zoom Up and Zoom Reset can be performed by dragging to the
bottom right and top left, respectively.
Fig. 6.9.11 Graph Drag / Zoom Up / Zoom Reset
Zoom Up
Zoom Reset
Right click and drag
Left click and drag
Left click and drag