Tokyo Keiki KRG-10, User Manual, Page: 183 / 200

10-12
Tracking Level tracking Move the valid window depending on
liquid level
Slow search Expand the valid window if surface
echo is Lost
Empty tank detection Fix the valid window if liquid level shall
be lower down to this value
Level prediction Output expected level
Search Search surface echo
Noise table Set signal threshold for each
measurement distance
Outlier removal Double bounce removal Ignore multiple reflected echoes
Valid window Set the valid window for echo detecting
Bottom visible Ignore the bottom echo
Fixed disturbance echo removal Ignore the echo from the obstacle by
registering it
Temperature compensation Correct echo position and level once a
minute or every time
Self-diagnosis Detect internal failure
Viewing electronic temperature of the transmitter -
Echo list List candidates of the surface echo
HART multidrop mode Connect multiple devices on the same
wiring
Reset Reboot Reboot the device
Parameter initialization Initialize parameters
Parameter backup Store the setting parameters in the
inside of the device
Parameter recovery Load the parameters that was stored in
the inside of the device
HART configuration changed flag Reset HART configuration changed
flag
Please check the Chapter 5 or Chapter 6, for more information about the function.