Tokyo Keiki KRG-10, User Manual, Page: 8 / 200

(7)
HOT CAUTION
There is a case, the antenna is a high temperature by the process. Do not touched carelessly,
because of there is a risk of burns.
CAUTION
Please follow the following items. If any of these conditions are not satisfied, incorrect measurement
value might be displayed or outputted, or may not be measured.
･
Please check the installation condition described in this manual.
･
Please use the device under predetermined power operating voltage range, in the range of ambient
temperature and humidity, which are described in this manual.
･
Please do not apply Impact or vibration to the device.
･
If the device is in a high noise area, it may not work properly or may be broken.
･
If signal for measurement cannot be detected, the warning mark flashes on the LCD. Also, when an
abnormal measurement is detected, a predetermined alarm is outputted. Please take appropriate
action in such a case.
･
Before you change device parameters, see appropriate section in this manual. And please set the
parameter correctly. If you set wrong parameter, the measurement may not to be accurate or may be
impossible.
・
Please tighten firmly so as not flooded from the gap between the display cover or terminal box cover.
Please note that there is no shortage of tightening. Also, Check whether different cover is not
attached.
・
Please be careful not flooded from wiring port.
Precautions on using
•
Before using the product, please check the model name and corresponding specifications.
·
The following accessory has been attached to this device. Please confirm that there is no shortage.
a) CD-ROM (User's guide (this manual), Configuration software)
b) Cable grand (only Non-Ex type)
c) O-ring (for fixing the flange: The material is due to specification)