Tokyo Keiki KRG-10, User Manual

Page: 143 / 200

6-68
(2) Checking measurement values
The following two methods are used to check device measurement values.
- Checking each measurement parameter by value
- Checking each measurement parameter by graph
(2-1) Checking each measurement parameter by value
Using the measurement value display area, device measurement values can be checked by
value for each parameter. The most recent measurement parameter values are displayed in
the measurement value display area. The measurement value display area becomes green
during measurement, and the measurement value display area becomes gray when
measurement is not activated. If “Negative Level as Zero” is set to ON and level become 0m,
level and distance are displayed in parentheses. The setting of “Negative Level as Zero” is
determined by the setting at the start of measurement.
Fig. 6.9.4 Checking measurement parameters by value
Measurement value display
during measurement
Display when measurement
is not activated
Negative Level as Zero: ON Normal measurement