Tokyo Keiki KRG-10, User Manual

Page: 69 / 200

5-14
[2-3] B (Breadth of channel)
Channel width. (Please refer Fig 5.4.3 Weir type)
[2-4] b (Width of weir)
Weir width. (Please refer 2: Edged Square of Fig 5.4.3 Weir type)
[2-5] D (Height of weir edge relative to bottom of channel)
Liquid height from notch end. (Please refer Fig 5.4.3 Weir type)
[2-6]
ν
(Kinematic viscosity of fluid)
Input a value of kinematic viscosity coefficient.
[2-7] Flow Unit
Flow rate unit.
Select unit for flow rate.
0: m
3
/D
1: m
3
/h
2: m
3
/min
3: m
3
/sec
4: US Gallons/D
5: US Gallons/h
6: US Gallons/min
7: US Gallons/sec
8: Barrels/D
9: Barrels/h
10: Barrels/min
11: Barrels/sec
12: Ft
3
/D
13: Ft
3
/h
14: Ft
3
/min
15: Ft
3
/sec
[3-0] Analog Current Output Parameter
Enter the content of parameters output at 4-20mA.
0: Level
1: Distance
2: Volume
3: Flow
4: Sig-Amp
[3-1] Minimum Output
Enter the Analog Current Output value corresponding to 4 mA.
(Level / Distance / Volume / Flow / Sig-Amp)
[3-2] Maximum Output
Enter the Analog Current Output value corresponding to 20 mA.
(Level / Distance / Volume / Flow / Sig-Amp)
[3-3] Alarm Selection
Enter the content of alarm output.
0: High
22 mA alarm output
1: Low 3.6 mA alarm output
2: Hold Hold last value