Tokyo Keiki KRG-10, User Manual

Page: 142 / 200

6-67
(1) Starting measurement
To start device measurement, click [Measurement] --> "Start" button. Measurement is started in
the period indicated below.
Measurement period
1 sec: When Echo List measurement / log is not included
5 sec: When Echo List measurement / log is included
Although the normal measurement interval is 1 second, if there is a check mark for either the
Echo List measurement or log in the measurement value display area, an Echo List
measurement is added, so the measurement interval changes to 5 seconds.
Fig. 6.9.2 Changing the measurement period
After measurement has started, the measurement mode display changes as follows. Details on
switching the measurement mode are described later.
Fig. 6.9.3 Measurement mode transition 1 (Not measured -> Measurement start)
Measurement
check Log check
Data update mode
Historical data mode
Not measured
After measurement start