6-43
Device information data
- ID
ID number to identify the device
(Read only)
- SW Ver.No
Firmware version of the device
(Read only)
- Product Tag
Character string of Packed ASCII (uppercase alphanumeric characters
and punctuation characters) used for identification of HART
communication
(Up to 8 characters)
- Long Tag
Character string of ISO Latin-1 (upper and lower case alphanumeric
characters, punctuation characters, and characters used in the EU
zone) used for identification of HART communication
(Up to 32 characters)
- Descriptor
Character string of Packed ASCII (uppercase alphanumeric characters
and punctuation characters) used for identification of HART
communication
(Up to 16 characters)
- Device
Number used to identify connected device of HART communication
(0 to 63)
- HART Multidrop Mode
Mode in which multiple field devices are connected on the same wiring
(ON/OFF)
- Boot Mode (*It is supported by firmware version 1.6.1 or later)
Select startup mode.
The recommended setting is "Normal".
Setting to "High Speed" is fast startup and reduced power
consumption, but the liquid surface may not be measured when used
in low signal amplitude or noisy environment.
(Normal/Fast)
Summary of Contents for KRG-10
