Tokyo Keiki KRG-10, User Manual, Page: 180 / 200

10-9
10.3 Antenna specifications
Table 10.3.1 Cone antenna
Antenna type Cone Diameter
･
2": (half-power beam width: 18°)
･
4": (half-power beam width: 8°)
Material SUS316L, PTFE
Operating
conditions
Process
temperature
Non-Ex
FKM:-10 to +150 °C
Kalrez:-20 to +150 °C
VMQ:-40 to +150 °C
NOTE:
For Ex equipment, please refer to the “Safety Instructions”.
Process
pressure
-0.1 to 1.5 MPa
Process
fitting
Flange
1)
(JIS B2220, DIN 1092-1, ANSI B16.5 etc)
1) Option
Table 10.3.2 PTFE sealing antenna
Antenna type PTFE
sealing
Diameter
･
2": (half-power beam width: 18°)
･
4": (half-power beam width: 8° )
Material SUS304, PTFE
Operating
conditions
Process
temperature
Non-Ex
FKM:-10 to +200 °C
VMQ:-40 to +180 °C
NOTE:
For Ex equipment, please refer to the “Safety Instructions”.
Process
pressure
-0.1 to 1.5 MPa
Process
fitting
Flange
1)
(JIS B2220, DIN 1092-1, ANSI B16.5 etc)
1) Option
Table 10.3.3 Rod antenna
Antenna type Rod Diameter
･
1": (half-power beam width: 25°)
Material SUS304, PTFE(or PFA)
Operating
conditions
Process
temperature
Non-Ex
VMQ:-40 to +150 °C
NOTE:
For Ex equipment, please refer to the “Safety Instructions”.
Process
pressure
-0.1 to 1.5 MPa
Process
fitting
Flange
1)
(JIS B2220, DIN 1092-1, ANSI B16.5 etc)
1) Option