Tokyo Keiki KRG-10, User Manual

Page: 6 / 200

(5)
Safety instructions and warnings
For safety, please follow the following items.
WARNING
･
Please follow the safety instructions in this manual. When dealing with the device contrary to
instructions, seller and manufacturer cannot guarantee safety.
·
Unauthorized modification of this device is strictly prohibited. For such damage or defect caused by
unauthorized modification, seller and manufacturer do not assume any responsibility.
WARNING
If the measurement object is toxic, please handle with caution even after removing and maintenance
of this device. For residual material on the device, please note as well, inhalation or contact with the
material may be harmful.
WARNING
For seal O-ring material, please carefully check the characteristics of the process material. Leakage
of process fluids caused by improper material selection, it can harm to the human body or the device.
For the structure of the parts of the device, please be sure to contact if you have any questions.
WARNING
Gases and vapors may pass through resin material such as PTFE and PVDF. With increasing
pressure and temperature, the rate of leakage is increased. For the environment, please check the
selection of antenna and seal O-ring material.
WARNING
For process connection, flange and bolts are optional. If you need a flange with hole, please check
details of modification described in this manual. (Refer to Chapter 10.) If the flange does not satisfy
the modification conditions, then the gas or vapor, such as used in the process, may leak.
CAUTION
When transferring the device, please be careful not to damage the human body by dropping it.