Thermo Scientific SOLA II, User Manual

Page: 26 / 205

Product Overview
Parts List
2-10 SOLA II User Guide Thermo Fisher Scientific
Table 2–4. Other specifications
Other specifications
AC power
Standard: 110 Vac, 50/60 Hz at 2000 W
Optional: 220 Vac, 50/60 Hz
Oven and purge air Instrument air: 55–100 psig, water and oil free; -40ºC (-
40ºF) dew point, particles
≤
5 m, ISA grade hydrocarbon
free, 8 SCFM (maximum)
Carrier and auxiliary air Zero grade air: 80 psig, 300 sccm (maximum)
Heliox (7
9 % helium, 21 % oxygen): 80 psig, 200 sccm
(maximum), for trace option
Sample tubing 316 stainless steel, cleaned and free from oils, moisture,
and debris
Sample wetted components 316 stainless steel, Teflon®, and graphite-filled Teflon;
others application dependent (Kalrez, Viton)
The following table lists the SOLA II / SOLA II Trace parts.
Note
Unless otherwise specified, the parts listed below are for the SOLA II
and the SOLA II Trace units.
σ
Table 2–5. SOLA II / SOLA II Trace parts list
P/N Description
75-1350-0 Actuator, standard temperature, air, 36 deg, 10-port
75-1348-0 Actuator, standard temperature, air, 90 deg, 6-port
89-2913-0 Assembly, Lookout Software
TE-8812 Attenuator, photo cell
TE-8887 Base assembly, PMT
TE-57P713-1 Bench assembly, SOLA II standard unit
TE-57P7125-
1
Bench assembly, SOLA II Trace unit
88-1216-0 Cable, DB9 for RS232 Modbus
TE-6279 Cable, RS232, assembly 6'
88-1217-0 Cable, TCP/IP to CPU
00-1010-S Cal standard for liquid units (specify volume, S concentration, and fluid, i.e.
liter, 6 ppm wt/wt thiophene in #2 diesel)
TE-5365 Connector pins, male, bench
Parts List