Thermo Scientific SOLA II, User Manual

Page: 118 / 205

Watlow EZ-ZONE® PM6 Series
Software Configuration
A-4 SOLA II User Guide Thermo Fisher Scientific
Parameter Default Comment
Display Software Display Software
Sensor Type Thermocouple
TC Linearization S For Type S thermocouple
Filter 0.5 For smoothing the process signal.
Input Error Latching Off
Display Precision Whole
Table A–3. Pyrolyzer settings: Setup Page > Control Loop 1
Parameter Default Comment
Display Software Display Software
Heat Algorithm PID The method of heat control.
Cool Algorithm Off
TRU-TUNE+ Enable No
Autotune Aggressiveness Critical Critical damped aggressiveness of
autotuning calculations.
User Failure Action User When user switches to manual
mode, controller sets output power
to last open-loop set point entered
by user.
Input Error Failure Off When an input error switches
control to manual mode, controller
sets output to 0%.
Open Loop Detect Enable No
Ramp Action Off
Low Set Point 0°C The minimum value of the closed
loop set point range.
High Set Point 1150°C The maximum value of the closed
loop set point range.
Set Point Open Limit Low -100.0% The minimum value of the open
loop set point range.
Set Point Open Limit High 100.0% The maximum value of the open
loop set point range.
Table A–4. Pyrolyzer settings: Setup Page > Output 1