Thermo Scientific SOLA II, User Manual

Page: 117 / 205

Watlow EZ-ZONE® PM6 Series
Software Configuration
Thermo Fisher Scientific SOLA II User Guide A-3
There are two ways to configure the EZ-ZONE PM6. You can use the menu
system built into the controller and configure it using the display and
appropriate keys to navigate through the system. Alternatively, you can use
the EZ-ZONE Configurator software. Instructions for both methods of
configuration are provided in the EZ-ZONE PM PID Controller user’s manual.
The built-in menu system and configuration software have the following main
pages.
λ
Setup page: Used to set up a control prior to operation.
λ
Operations page: Used to monitor or change runtime settings.
λ
Factory Page: Used to enable password protection, create a custom
Home Page, and perform other tasks that do not have an effect on the
control when running.
λ
Home Page: The page that is displayed when the control is initially
powered up.
Parameters for the EZ-ZONE PM6 are set to the optimum values for your
application at the factory. The defaults settings are provided here in the event
the configuration is changed without authorization.
Caution!
Changing the parameters may adversely affect the system
performance.
σ
The default settings for the pyrolyzer are provided in the tables on the
following pages.
Table A–2. Pyrolyzer settings: Setup Page > Analog Input 1
Software
Configuration
Pyrolyzer Settings