Thermo Scientific SOLA II, User Manual

Page: 126 / 205

Watlow EZ-ZONE® PM6 Series
Software Configuration
A-12 SOLA II User Guide Thermo Fisher Scientific
Table A–18. Oven settings: Setup Page > Control Loop 1
Parameter Default Comment
Display Software Display Software
Heat Algorithm PID The method of heat control.
Cool Algorithm Off
TRU-TUNE+ Enable No
TRU-TUNE+ Band 0°C
TRU-TUNE+ Gain 3
Autotune Aggressiveness Critical Critical damped aggressiveness of
autotuning calculations.
Peltier Delay 0.0
User Failure Action User When user switches to manual
mode, controller sets output power
to last open-loop set point entered
by user.
Input Error Failure Off When an input error switches
control to manual mode, controller
sets output to 0%.
Fixed Power 0.0%
Open Loop Detect Enable No
Open Loop Detect Time 240
Open Loop Detect Deviation 6.0°C
Ramp Action Off
Ramp Scale Minutes
Ramp Rate 1.0°C
Low Set Point 0°C The minimum value of the closed
loop set point range.
High Set Point 200.0°C The maximum value of the closed
loop set point range.
Set Point Open Limit Low -100.0% The minimum value of the open
loop set point range.