Thermo Scientific SOLA II, User Manual

Page: 14 / 205

Safety Information & Guidelines
Safety Summary
1-2 SOLA II User Guide Thermo Fisher Scientific
The following admonitions are used throughout this manual to alert users to
potential hazards or important information.
Failure to heed the warnings
and cautions in this manual can lead to injury or equipment
damage.
Warning
Warnings notify users of procedures, practices, conditions, etc.
which may result in injury or death if not carefully observed or followed. The
triangular icons with warnings vary depending on the hazard.
σ
Caution
Cautions notify users of operating procedures, practices, conditions,
etc. which may result in equipment damage if not carefully observed or
followed.
σ
Caution
Static sensitive component. Appropriate handling precautions
required to prevent damage.
σ
Note
Notes emphasize important or essential information or a statement of
company policy regarding an operating procedure, practice, condition, etc.
σ
This section contains general safety and operating information applicable to
analytical systems, which must be understood by all persons installing, using,
or maintaining the analyzer system. This information is designed to aid
personnel in the safe installation, operation, and service of the analyzer and
sample systems. It is not designed to replace or limit appropriate safety
measures applicable to work performed by personnel. Any additional safety
and operating measures that are required must be determined by and
followed by personnel performing work on the system.
Caution
Failure to heed the following information may lead to equipment
damage or injury to personnel.
σ
Protective eyewear (glasses with side shields or goggles as appropriate) must
be worn when servicing any part of the analyzer or sample system. When
servicing the sample system, chemical resistant gloves appropriate for the
materials in the system must be worn. When servicing the hot analyzer oven,
internal components (e.g., detectors), or hot sample system components,
appropriate gloves must be worn. Heated components should be allowed to
cool before servicing if possible. Other appropriate equipment or clothing
must be used as required by the type of work performed.
Safety Summary
Safety Operating
Information