Thermo Scientific SOLA II, User Manual

Page: 102 / 205

Maintenance & Troubleshooting
Replacing the Pyrolyzer Heater
10-8 SOLA II User Guide Thermo Fisher Scientific
Figure 10–5. Heater wires and thermocouple
Figure 10–6. Remove the fiberglass insulation
10. Loosen the fittings around the heater wires and remove the wire sleeves.
Set the sleeves and fittings aside.
11. Loosen the thermocouple fitting and remove the thermocouple from the
housing. Set it aside for re-installation later.
12. You should now be able to remove the heater from the housing.
13. Insert the replacement heater into the housing (Figure10-7). Feed the two
heater wires through the two fittings on the other side of the housing
(Figure 10-8).