Thermo Scientific Nicolet Continuum User Manual Download Page 84

Page: 84 / 195

Thermo Scientific

The Transmission indicator lights when transmission mode is

selected. The Reflection indicator lights when reflection mode is

selected.

4. Rotate the round visible polarizer with your finger until the

field of view becomes dark.

The polarizers are now crossed.

5. Install the sample and focus.

If you have difficulty seeing the sample to focus, try rotating the

sample.

If you still cannot see the sample after completely rotating it, it is

likely that there is no polarization data. Try another technique.

6. While viewing the sample through the eyepieces or through

the video display, rotate the sample or the round visible

polarizer to see the differences in sample composition.

Note

The optional rotatable stage is ideal for this type of experiment. The

universal slide holder can also be rotated. We recommend that you

rotate the sample rather than the polarizer while looking for

differences in sample composition.



Summary of Contents for Nicolet Continuum




































































































































































































Search results

Summary of Contents for Nicolet Continuum

Reviews:

Related manuals for Nicolet Continuum

Brands by name

Popular brands

Thermo Scientific Nicolet Continuum, User Manual

Search results

Summary of Contents for Nicolet Continuum

Reviews:

Related manuals for Nicolet Continuum

Brands by name

Popular brands