Thermo Scientific Nicolet Continuum User Manual Download Page 69

Page: 69 / 195

Continuµm User Guide

4. Start OMNIC and select “Transmission discrete point –

standard sample“ from the Experiment drop-down list box.

5. Choose Show Atlµs Window from the Atlµs menu.

When the Atlµs window opens you will see the video pane on

the right side of the screen, the navigation (stage position) pane

on the left, and the Atlµs tool palettes near the bottom of the

screen. You may or may not be able to see a clear image in the

video pane at this point.

You may also be able to see the default background (crosshairs

with the letter B) and sampling points (crosshairs with a number

and an asterisk). Whenever video capture is enabled at the

sampling point, an asterisk appears in the designator. When more

than one discrete sampling point is mapped for an experiment,

data will be collected from sampling point 1, then 2, and so on.

Summary of Contents for Nicolet Continuum




































































































































































































Search results

Summary of Contents for Nicolet Continuum

Reviews:

Related manuals for Nicolet Continuum

Brands by name

Popular brands

Thermo Scientific Nicolet Continuum, User Manual

Search results

Summary of Contents for Nicolet Continuum

Reviews:

Related manuals for Nicolet Continuum

Brands by name

Popular brands