Thermo Scientific Nicolet Continuum User Manual Download Page 59

Page: 59 / 195

Continuµm User Guide

8. If you have an optional motorized stage, home the stage to

the area of interest in your sample.

Choose Move Stage from the Atlµs menu and then choose Set

Home to Current.

9. Refine the standard experiment background and sample

point area settings for your sample position.

Use the tool palette and Atlµs menu items as follows:

Click the Full Range View button to zoom the navigation pane

all the way out to display the full range of stage travel allowed

by your stage controller. You should now be able to see the

sample (crosshairs labeled with a number) and the background

point (crosshairs with the letter B) defined in the standard

experiment.

If you cannot, use the Zoom buttons to zoom in until you can see

the both sample and background point indicators.

Summary of Contents for Nicolet Continuum




































































































































































































Search results

Summary of Contents for Nicolet Continuum

Reviews:

Brands by name

Popular brands

Thermo Scientific Nicolet Continuum, User Manual

Search results

Summary of Contents for Nicolet Continuum

Reviews:

Brands by name

Popular brands