Thermo Scientific NanoDrop One User Manual Download Page 289

Page: 289 / 328

Learning Center

NanoDrop One Viewer Software

Thermo Scientific

NanoDrop One User Guide

283

Formula table (optional)

Use the Formula table to specify additional reported results, such as a purity ratio, for
each sample.

Available options:

• Predefined.

Select from a list of predefined formulas, which can be used as is or

edited, and choose

Add

. The predefined formula is listed in the Formula Table.

•

Add

. Create formula for current method. Available options:

•

Formula Name

. Enter a name for the formula. After a measurement, the

name is reported in Data Table and Sample Details screens.

•

Formula

. Enter valid formula (see below for rules and examples). After a

measurement, the measured or calculated value is reported in Data Table and
Sample Details screens.

•

Unit

. Enter unit for reported result. After a measurement, the unit is reported

in Data Table and Sample Details screens.

•

Edit

. Edit selected formula for current method.

•

Delete

. Delete selected formula from current method.

Formula rules

Custom formulas can include the following operators and functions:

•

Path()

. Returns sample pathlength in cm.

•

A(nm)

. Returns sample absorbance at specified wavelength (for example, enter

A(650) to add the measured absorbance at 650 nm to your equation).

•

Operators

: + (add), - (subtract), * (multiply), / (divide).

•

Functions

: Log(x), Pow(x,y).

Note

s: Follow these additional rules for all languages:

• Use period “.” decimal separators for floating point and double-floating point

numbers.

• Use comma “,” list separators (for example, “POW(2,8)”).

• Do not use comma “,” group separators for large numbers (for example, enter

1000 rather than 1,000).

Setting

Available Options

Summary of Contents for NanoDrop One








































































































































































































































































































































Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands

Thermo Scientific NanoDrop One, User Manual

Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands