Thermo Scientific NanoDrop One User Manual Download Page 146

Page: 146 / 328

Measure Custom

140

NanoDrop One User Guide

Thermo Scientific

Load custom methods onto the instrument

Export the method

from the personal computer and copy the method file to the root of a

portable USB device such as a memory stick.

Method files have a “.method” filename extension.

2. Connect the USB device to one of the

USB ports

on the instrument.

3. From the Home screen, select the

Custom

tab and tap

Custom

4. Use the list box at the top of the screen to indicate the USB port used.

5. Tap

Load Method

A message box shows the NanoDrop One methods available on the selected USB device.

6. Tap one or more method names in the Load Method box to select the methods to load.

7. Tap

Load

Note

Custom methods downloaded from the NanoDrop One website have a .zip

filename extension and must be extracted using a third-party file decompression
program before the software will recognize them as custom methods.

Summary of Contents for NanoDrop One








































































































































































































































































































































Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands

Thermo Scientific NanoDrop One, User Manual

Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands