Thermo Scientific NanoDrop One User Manual Download Page 297

Page: 297 / 328

Maintenance

Cleaning the Touchscreen

Thermo Scientific

NanoDrop One User Guide

291

Cleaning the Touchscreen

NOTICE

To avoid causing permanent damage to the touchscreen, do not:

• clean the touchscreen with abrasive material such as paper towel

• apply excessive pressure

• spray liquid directly onto the touchscreen

• apply lubricant to the touchscreen slide mechanism

To clean the touchscreen

Gently wipe the touchscreen with a soft, lint-free cloth such as
microfiber.

If necessary, use a cleaner intended for glass LCD displays and
follow the manufacturer’s recommendations.

Related Topics

• Clean Pedestals

• Recondition Pedestals

• Decontaminate Instrument

Summary of Contents for NanoDrop One








































































































































































































































































































































Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands

Thermo Scientific NanoDrop One, User Manual

Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands