Thermo Scientific NanoDrop One User Manual Download Page 322

Page: 322 / 328

Safety Information

308

NanoDrop One User Guide

Thermo Scientific

Fire Safety and Burn Hazards

To avoid a burn injury and the risk of fire or explosion:

• Use caution when testing flammable or explosive samples (see the “Hazardous Materials”

section)

• Never block any of the vents on the instrument or its power supply

• Only use exact replacement power supplies from us

Optical Safety

This instrument was designed with a protective housing to prevent user exposure to
ultraviolet light.

Hazardous Materials

Many standard spectroscopy methods are based on the use of solvents. Others involve
corrosive samples or pressurized samples in a gaseous state.

Volatile Solvents and Flammable Samples

Compatible Solvents

NOTICE

Do not position the instrument so that it is difficult to operate the power switch

or access the power supply and power cord.

WARNING

Avoid personal injury. Never look at the lamp while illuminated.

CAUTION

Avoid personal injury. Do not leave solvents or flammable samples near the

instrument. Be sure that the workspace is properly ventilated.

Summary of Contents for NanoDrop One








































































































































































































































































































































Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands

Thermo Scientific NanoDrop One, User Manual

Search results

Summary of Contents for NanoDrop One

Reviews:

Related manuals for NanoDrop One

Brands by name

Popular brands