Thermo Scientific IMP 180, Manual

Page: 85 / 118

Handling and Control
Programming
Thermo Scientific Heratherm IMP 7-31
In the list of existing programs (for example:
P1...P4
;
default selection is
P1
) shown at left, choose any
program by pressing , then press to confirm
the deletion.
In the confirmation dialog for the deletion that appears,
press to choose the
Yes
option (default selection is
No)
, then press to have the deletion carried out.
The display returns to its default mode.
The program memory is free to accept a new or copied
program (see “Creating a New Program” on page 7-28
and the procedure described below under “Copying an
Existing Program” ).
Table 7-33 Copying an Existing Program
Press to activate the menu bar, then use or
to select the
Program
icon and press to
confirm.
In the selection screen shown at left, press to
switch to the
Copy
option.
In the list of existing programs (for example:
P1...P4
;
default selection is
P1
) shown at left, choose any
program by pressing , then press to start
copying.
Table 7-32 Deleting an Existing Program
2010-04-13 10:25
AM
Delete
P1 P2 P3 P4
2010-04-13 10:25
AM
Delete
P4
Yes No
2010-04-13 10:25
AM
Program
Copy
2010-04-13 10:25
AM
Program
Start
2010-04-13 10:25
AM
Copy
P1 P2 P3 P4