Thermo Scientific IMP 180, Manual

Page: 70 / 118

Handling and Control
Settings
7-16 Heratherm IMP Thermo Scientific
Date and Time
The Settings -> Time / Date option allows for switching between the international time and
date display formats and for setting the time and date of the internal clock. There are two
display formats to choose from:
• European date format DD.MM.YYYY and 24-hours time format. Example: 07.04.2010
and 15:05 .
• US standard date format YYYY-MM-DD and 12-hour time format with AM/PM suffix.
Example: 2010-04-07 and 3:05 PM .
Table 7-19 Entering the Calibration Reference Temperature Manually
Prepare for temperature calibration (see “Preparing Tem
-
perature Calibration” and “Comparison Measurement Pro
-
cedure” on page 10-3 ).
Press to activate the menu bar, then use or
to select the Settings icon and press to
confirm.
The Error menu item from the Settings submenu
appears in the multifunctional display pane.
Press to switch to the
Calibration
menu item and
confirm the selection with .
In the
Calibration
selection screen, press to
choose the preselected option Manual .
In the settings dialog that appears, set the temperature
measured with the external reference sensor by using
or and confirm the settings with .
The newly entered value will be stored and used to
calibrate the internal temperature sensors with the
value measured by the reference sensor.
The display returns to its default mode.
The Settings icon in the menu bar will go out.
2010-04-06 1:33
PM
Settings
Error
2010-04-06 1:33
PM
Settings
Calibration
2010-04-06 1:33
PM
Settings
Calibration
Manual
2010-04-06 1:33
PM
Settings
Calibration
36.9°C