Thermo Scientific IMP 180, Manual

Page: 59 / 118

Handling and Control
Switching the refrigerated incubator Off / Powering Down
Thermo Scientific Heratherm IMP 7-5
Switching the refrigerated incubator Off / Powering Down
1. Keep the On/Off button depressed for two seconds.
The display window goes out, except for the readiness indicator icon (rightmost icon in
the status display area at D4 in
figure 7-1
on page 7-1 ) and a residual heat temperature
readout in case the work space temperature is still higher than 50 °C (122 °F). The
refrigerated incubator is switched off now.
2. If required, unplug the AC power plug to power down the refrigerated incubator
completely.
Temperature Set Value
Heratherm refrigerated incubators allow for setting the desired work space temperature
directly using only a few button presses. After confirming the new temperature set value in the
settings pane
Set (item D5 in figure 7-1 on page 7-1 ), the user may trace the resulting
temperature change in the temperature display field (item D1 in figure 7-1 on page 7-1 ).
Table 7-4 Adjusting the Temperature Set Value
Press to activate the menu bar, then use to
select the Temperature icon and press to confirm.
In the flashing settings pane Set , press or to
adjust a new temperature set value, then press to
confirm your settings.
The display returns to its default mode.
The actual temperature measured in the work space
and shown in the temperature display area starts to
change until it reaches the newly adjusted set value.