Thermo Scientific IMP 180, Manual

Page: 21 / 118

Installation
Transport
Thermo Scientific Heratherm IMP 3-5
Transport
Table-top refrigerated incubators
For transport, do not lift the refrigerated incubator using the doors or components attached to
the refrigerated incubator as lift points.
Figure 3-3 Lift Points
Humidity
After transport or storing under humid conditions a drying-out
process must be performed. During the drying-out process the
equipment cannot be assumed to meet all the safety
requirements of the IEC 61010-2-010 standard. The drying-out
period is 2 hours.
Heavy loads! Lift with care!
To avoid injury through physical strain, such as strain traumata
and slipped discs, do not attempt to lift the refrigerated incubator
alone!
To avoid injury through dropped loads, be sure to wear Personal
Protection Equipment, such as safety shoes, when lifting the
refrigerated incubator.
To avoid crushing your fingers or hands (particularly in a closing
door) or damaging the refrigerated incubator, do not use any other
lift points than those indicated in the illustration above.