Thermo Scientific IMP 180, Manual

Page: 79 / 118

Handling and Control
Settings
Thermo Scientific Heratherm IMP 7-25
Configuration
The Settings -> Configuration menu item enables the user to enter a four-digit code that
loads a specific set of operating parameters for the - for example, in order to make the voltage
selection described in the section
“Connecting the RS-232 Interface” on page 5-11 (only for
180 liter units).
Table 7-27 Entering the Four-digit Code
Press to activate the menu bar, then use or
to select the
Settings
icon and press to
confirm.
The
Error
menu item from the
Settings
submenu
appears in the multifunctional display pane.
Press to switch to the
Configuration
menu item
and confirm the selection with .
The multifunctional display pane will present a prompt
similar to the example shown at left, with the first digit of
the four-digit configuration code flashing.
Set the first digit of the configuration code using (or
) and confirm your setting with . Set the
remaining three digits exactly as described above.
By confirming your entry for the last digit with , the
new configuration is activated immediately.
The display returns to its default mode.
The
Settings
icon in the menu bar will go out.
2010-04-06 1:33
PM
Settings
Error
2010-04-12 12:00
PM
Settings
Configuration
2010-04-12 12:00
PM
Settings
Configuration
0208
2010-04-12 12:00
PM
Settings
Configuration
0240