background image

Transportation and storage

68

07/05/2018

Fig. 63

 CAUTION

Risk of collisions!

During underriding of the working platform it is possible for the working platform
and the transport vehicle to collide.

Always ask a second person to monitor the danger zone and warn the driver
of the transport vehicle of any possible collision.

4. Move the transport vehicle until it is centred under the working platform and the

crawler tracks are centrally flush above the auxiliary frame. Arrows are affixed
to the crawler chassis and the auxiliary frame for this purpose.

5. Lower the working platform slowly and move the bracing to the transport posi-

tion (

Ä

Chapter 7.16 „Moving the bracing into the transport position”, on page

126).

6.5.2

Lashing

Personnel:

n

Specialist staff

Protective equipment:

n

Occupational safety clothing

n

Safety shoes

1

1

Fig. 64

1. The attachment points on the working platform and the transport frame are la-

belled with the lashing eye symbol. The lashing points  (Fig.64/1) are provided
for lashing to the auxiliary frame.

Summary of Contents for LEO 27T

























































































































































































































































































































Reviews: