TEUPEN LEO 27T, Translation Of The Operating Instructions, Page: 56 / 312

Construction and function
56
07/05/2018
5.3.4 Combustion engine controller
1
Fig. 38
The engine controller is operated directly on the combustion engine (Fig.38/1)
5 6
4
1
3
2
Fig. 39
1 - operation/fault LED Indicates the operating status.
– A green LED indicates everything is OK.
– A red LED indicates that there is a fault.
2 - display Shows the operating status as well as fault messages.
3 - up arrow key The arrow key can be used to select the next display or increase values.
4 - down arrow key The arrow key can be used to select the previous display or reduce values.
5 - set key The set key is used to confirm inputs.
6 - key switch The key switch is used to start and stop the combustion engine and make settings.
NOTICE
The combustion engine must only be switched on and off using the key switch on
the motor control in service mode.