TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 47 / 312

Construction and function
07/05/2018 47
5.1.1 Brief description
The aerial lift is used for performing work at heights. It is controlled using a radio
control in the working basket or on the ground.
If the radio control is not in the holder in the working basket, the functions "Raise"
and "Telescope out" are disabled. In order to engage the aerial lift platform’s work
position, the automatic or manual bracing lifts the chassis using the outriggers. Lift
operation may not be started until the chassis has been correctly levelled (visual in-
spection using circular level).
The bracings can be set in four bracing positions:
n Wide on both sides
n
Narrow on one side, left
n Narrow on one side, right
n
Narrow on both sides
You can adjust the height of the left-hand and right-hand chassis independently of
one another mechanically or (optionally) hydraulically.
The working basket is kept horizontal at all times by an electro-hydraulic balancing
system.
Power is supplied either from the mains supply (construction site feed point) using
an extension cable, by a combustion engine or by a battery drive.