TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 116 / 312

Operation
116
07/05/2018
7.13 Operating the platform assembly
Personnel:
n
Trained persons
Protective equipment:
n Occupational safety clothing
n
Safety boots
n Safety helmet
n
Safety harness
WARNING
Risk of injury due to improper operation!
Improper operation can cause severe injuries and significant material damage.
– Always wear a safety harness fastened to the attachment points when in the
working basket (
Ä
Chapter 5.2.4 „Working basket”, on page 49).
– Do not swing or make sudden movements when in the working basket.
– Always perform any work with the help of at least a second person, with one
person remaining on the ground at all times in order to be able to actuate the
emergency control as necessary.
– Make sure that the ladder is folded up and locked.
– Do not climb onto the safety fence around the basket.
– Do not work on or near high-voltage lines.
– Beware of high obstacles.
– Make sure that when moving the working basket, no body parts are crushed,
e.g. against a wall.
– At wind speeds above 12.5 m/s (Beaufort force 6 Bft), stop work immediately.
WARNING
Emergency operation inoperative!
If the machine’s main battery voltage has dropped to < 11.2 V, battery capacity is
insufficient for emergency operation.
– Before executing any platform functions, recharge the main battery (
Ä
Chapter
7.26 „Charging the main battery”, on page 172).
– Never begin platform operations without first checking the main battery’s ca-
pacity. (Main battery voltage must be > 11.2 V!)
– Operation of the platform assembly at a main battery voltage of < 11.2 V is
prohibited!
1. Check the main battery’s capacity (
Ä
Chapter 7.25 „Checking the main bat-
tery’s capacity”, on page 171).
2. Switch on the machine ( Ä Chapter 7.3 „Switching the machine on/off”, on page
73).
3. Move the outriggers into the desired work position (
Ä
Chapter 7.9 „Moving the
bracing into the work position”, on page 101).