TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 31 / 312

Safety
07/05/2018 31
Rotary angle sensors
Fig. 12
The rotary angle sensors monitor the angle of the lift boom holder, lower boom, up-
per boom and working basket. Depending on the conditions, fault messages may
be issued, the lowering speed may be regulated and the correct position for lower-
ing into the transport position may be displayed as a result.
Length measurement
sensors
Fig. 13
Length measurement sensors detect the profiles’ extension travel.
Tilt sensor
Fig. 14
During automatic bracing, the tilt sensor is used to automatically level the aerial lift
platform horizontally.
Circular level
Fig. 15
The maximum permissible inclination is noted on the type plate; this must be
checked visually with the circular level.